2024 Nason ful thane 2k urethane single stage mixing ratio

Just got done spraying red Nason 2k Ful-thane single stage for the first time. I have some orange peel here and there along with some dirt in the hood. I have color sanded Centari and Delstar, but I am not sure how to tackle this with this newfangled urethane. I intend to hand wet sand with 1200 then buff.. Does braum

US :ENGLISH Ful-Thane 2K 2K Urethane Activator 483-15 Section 4. First aid measures Wash out mouth with water. Remove dentures if any. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomitingDetailed Description. Activator; Ful-Base 483-56 Low VOC Activator is used to mix Nason Ful-Thane 2K Urethane Topcoat (IS Quality), a 2.8 lbs/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.Axalta nason 2k integrated clear 401 20. Vht paint 70312 views. 8 1 2 ratio is for nason ful thane single stage. Designed to enhance the depth and color of ful thane factory packaged colors ful thane 2k urethane single stage colors and ful cryl ii mix colors. Nason paint color chart. How to mix nason car paint by contributor. Visit the post for ...Dupont Fleet book, page by page. If you are on a PC click on any of the. images and the images will pop up. You can hit next and the whole or most of the page will turn into a gallery.Parts by Volume. 491-16™. 1. 483-19™. 1. Viscosity. 16-22 seconds in a Zahn #2 cup. Pot Life. 24 hours at 70°F.Item#: NAS 400-01 01. Ful-Thane® 400-01 Factory Packaged Black provides outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. To 1 gallon of Ful-Thane® 2K Urethane, add 1 pint of 483-15™ Catalyst. Reduce with 1 quart Ful-Base® 441 ...K. kmoses Discussion starter · Feb 10, 2012. I sprayed the entire car with Nason Select-Prime 421-19 2K urethane primer and block sanded to P400 dry. I then sprayed the two front fenders, the hood and the trunk lid with Nason Ful-Poxy 491-16 Epoxy primer blocked sanded dry to P400 and wet sanded to P500 ( I am planning to spray the whole car ...Parts by Volume. 491-10™. 2. 483-01™ / 483-02™. 1. Viscosity. 20-22 seconds in a Zahn #2 cup. Pot Life. 12 hours at 70°F.Axalta Nason Ful-Base Reducer 441-21 Medium Quart. Item#: NAS 441-21 -4. Reducer for Nason topcoats and urethane primers. 65-85 Degrees.Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...pre-formulated flat/mat clears are SOOOOOOOOO much easier on bigger jobs and all overs. all you do is mix and go. you can adjust the flatness by how many coats and reducer, again so much easier than a flattening ratio with an additive. i've done a few with sikkens mat clear with no problems, now give me a 2 component system where i have to mix some single stage and flattener in it and i cant ...Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.8-1-2 ratio is for Nason Ful-Thane single stage . Check the label on the can of color for the correct ratio and hardener numbers . If the lower door is your only problem why not just respray the door to the side mldg just above the handle .To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Axalta Nason 2K Integrated Clear 401-20. Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors.Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. Gallon. Approved customers please Log In or Register for approval.Axalta Nason 2K Integrated Clear 401-20. Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors.435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryMixing Tips/Nozzles ... Activator for Nason Ful-Thane 2K Urethane Single Stage Paint. Vendor: Mahopac Auto Paint ...Search Nason Search Nason. Safety Data Sheets. Print; Print page to PDF; Nason - Safety Data Sheets - English. Downloads. Type ...Dupont / Nason, Urethane Full Thane 2K Urethane, Single Stage,automotive paint restoration, 1-888-724-6844 Auto Paint Pro, Inc. [email protected] 23/10/2013 · The owner bought the cheapest single stage the paint shop had, Nason Urethane. After shooting we did a light scuff with 1200 to let it gas off for a week.Ful-Thane 2K Urethane Binder (IB Quality) (PDF 362.8 kB) Nason Ful-Base Enamel Topcoat (IC Quality) (PDF 258.0 kB) Nason Ful-Cryl II 2K Acrylic Enamel Topcoat (ID Quality) (PDF 334.5 kB)Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...Axalta Nason 2K Urethane Sealer 422-50 Gallon. Item#: NAS 422-50 01. Nason 422-50 is a 2K urethane, non-sanding sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. Approved customers please Log In or Register for approval. Axalta Nason 2K Urethane Sealer Quart White.Year old Nason Ful-Thane cut and buff. I have a car that was sprayed last September with Nason Ful-Thane single stage urethane (solid color). It has been stored inside since being painted. The paint job came out glassy smooth but I have some dirt and dust nibs in the paint. My question is what grit should I sand it with to remove the nibs.Application. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic.Volume: 16 Ounce. Fast and easy to apply, Nason (R) Finishes take you from start to beautiful finish with speed and efficiency at a low cost. The system was designed to work together to give you the best results when time and money are limited. Nason (R) undercoats, topcoats and clears deliver Value in a Hurry (TM).Axalta Nason Fulthane 2K Urethane Pint Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix for ...Show's how to do a complete automotive paint job using inexpensive materials such as old school lacquer primer from Auto Body Master and Nason Ful-Cryl II Ac...A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions ApplicationI never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some 600 to it the next day.Item#: NAS 400-50 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. GM Code 12 White 400-50 Gallon.I never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some 600 to it the next day.A 2K urethane, non-sanding, gray sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. It can be applied directly over a variety of substrates, including sanded OEM replacement panels. Features. Grey in color; Good application properties; Fast nib sanding; Product DetailsMIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Ful-Thane® 2K Urethane Binder (IB Quality) Ful-Thane® 483-15TM 2K Urethane Activator Ful-Base® 441-20TM / 441-21TM / 441-22TM Reducer Volume 8 ADDITIVES Fisheye EliminatorDupont / Nason, Urethane Full Thane 2K Urethane, Single Stage,automotive paint restoration, 1-888-724-6844 Auto Paint Pro, Inc. [email protected] 23/10/2013 · The owner bought the cheapest single stage the paint shop had, Nason Urethane. After shooting we did a light scuff with 1200 to let it gas off for a week.Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Ful-Thane® 2K urethane is also available in Ful-Thane® 400-XX High Volume Factory Packages.Part 401-20-4. 1 qt Paint. Designed to enhance the depth and color of Ful-Thane factory packaged colors, Ful-Thane 2K Urethane single-stage colors and Ful-Cryl II mix colors. Specifications.Detailed Description. Activator; Ful-Base 483-56 Low VOC Activator is used to mix Nason Ful-Thane 2K Urethane Topcoat (IS Quality), a 2.8 lbs/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.Scjarena Discussion starter · Jan 8, 2018. I never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some ...Ful-Thane 2K Low VOC Urethane Single Stage (NIS Quality) may be mixed with VS6200 Matte Base Additive to achieve various levels of desired gloss. For accurate mixing, refer to the matte mix formula in ColorNet® or Color Choice®. ADDITIVES . Fisheye Eliminator . Add 1 - 2 oz (30 ml – 60 ml or 30 – 60 grams) Axalta VS6500 Fisheye Eliminator ...Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...Additive: FEE: 2-4 oz 495-01™ per RTS gal. Accelerator: 2-4 oz 483-18™ per RTS gal. Viscosity: 20-21 seconds in a Zahn #2 cup: Pot Life: 4 hours at 70°FThane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)Parts by Volume. 491-10™. 2. 483-01™ / 483-02™. 1. Viscosity. 20-22 seconds in a Zahn #2 cup. Pot Life. 12 hours at 70°F.Detailed Description. Activator; Ful-Base 483-56 Low VOC Activator is used to mix Nason Ful-Thane 2K Urethane Topcoat (IS Quality), a 2.8 lbs/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.Con el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions ApplicationThane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)If you use more reducer, or over reduce it, you can use the 2k primer as a sealer as well. MTK isn't a primer. It's a SS topcoat urethane that can be cleared or mixed with clear on the final coat.435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryDupont Fleet book, page by page. If you are on a PC click on any of the. images and the images will pop up. You can hit next and the whole or most of the page will turn into a gallery.Ful-Base® Basecoat IF Quality Color 8 Ful-Base® 483-30™ Basecoat Activator ½ Ful-Base® 441-2X™ Reducers 4 *Do not use 441-29 POT LIFE 4 hours at 70°F (21°C) SPRAY VISCOSITY 20-21 seconds in a Zahn #2 APPLICATION SURFACE PREPARATION Before sanding, remove all traces of oil, wax and grease with Nason® 441-05™ Silicone andItem#: NAS 400-01 01. Ful-Thane® 400-01 Factory Packaged Black provides outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. To 1 gallon of Ful-Thane® 2K Urethane, add 1 pint of 483-15™ Catalyst. Reduce with 1 quart Ful-Base® 441 ...MIX RATIO . Combine the components by volume (4:1:1). Mix thoroughly prior to activation. Component Volume . Ful-Thane 2K Urethane Single Stage Color (NIB Quality) 4 . Axalta VS5300 Urethane Activator 1 . Axalta VS5160 / VS5170 / VS5180 / VS5190 Reducer 1 435-00, 435-01 Ful-Thane Binders VS5300 Urethane Activator VS5160, VS5170, VS5180, VS5190 ...DuPont Top Coat Nason® Ful-Thane® 2K IB Quality Single-Stage Topcoat FUL-THANE® 2K URETHANE Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Download tech data.435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryParts by Volume. 491-16™. 1. 483-19™. 1. Viscosity. 16-22 seconds in a Zahn #2 cup. Pot Life. 24 hours at 70°F.MSDS Technical Data Sheet Description A urethane single-stage topcoat that is easy-to-apply and provides outstanding durability for a variety of applications. Features Solventborne Easy to apply Outstanding durability Product Details Available Sizes Mixing Instructions Application Instructions ApplicationAxalta Nason Fulthane 2K Urethane Quart Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix for ...435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryClear Coat 2K Acrylic Urethane, SMR-1150/1102-Q 4:1 Gallon Clearcoat Medium Kit. For California, Delaware, or Maryland, order SS-132. 4.6 out of 5 stars 771Additive: FEE: 2-4 oz 495-01™ per RTS gal. Accelerator: 2-4 oz 483-18™ per RTS gal. Viscosity: 20-21 seconds in a Zahn #2 cup: Pot Life: 4 hours at 70°FIn this video I finish up a series of door repair videos by painting the repaired panel using Nason Ful-Cryl II Single Stage Acrylic Enamel. Nason Ful-Thane ...Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors.Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. MIX RATIO . Combine the components by volume (4:1:1). Mix thoroughly prior to activation. Component Volume . Ful-Thane 2K Urethane Single Stage Color (NIB Quality) 4 . Axalta VS5300 Urethane Activator 1 . Axalta VS5160 / VS5170 / VS5180 / VS5190 Reducer 1 435-00, 435-01 Ful-Thane Binders VS5300 Urethane Activator VS5160, VS5170, VS5180, VS5190 ...Axalta Nason FulCryl II Acrylic Enamel Gallon Mix Item#: NAS ID 01. An acrylic enamel single-stage topcoat that provides very good gloss, chip resistance and durability for excellent performance characteristics. Please contact store for the proper price suffix for your color. Stock or paint code text may be added in the cart.Year old Nason Ful-Thane cut and buff. I have a car that was sprayed last September with Nason Ful-Thane single stage urethane (solid color). It has been stored inside since being painted. The paint job came out glassy smooth but I have some dirt and dust nibs in the paint. My question is what grit should I sand it with to remove the nibs.A 2K urethane, non-sanding, gray sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. It can be applied directly over a variety of substrates, including sanded OEM replacement panels. Features. Grey in color; Good application properties; Fast nib sanding; Product DetailsFul-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...MIX RATIO Combine the components by volume (4:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane® 2K Urethane Topcoat (IS Quality) 4 Ful-Base® 483-56™ Low VOC Activator 1 Ful-Base® 441-60™ / 441-66™ / 441-68™ Reducer 2 ADDITIVES Fisheye Eliminator Add ½ to 2 oz Nason® 495-02™ Low VOC Fisheye Eliminator per ready ...Item#: NAS 400-53 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. Approved customers please Log In or Register for approval.A 2K urethane, non-sanding, gray sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. It can be applied directly over a variety of substrates, including sanded OEM replacement panels. Features. Grey in color; Good application properties; Fast nib sanding; Product DetailsTitle: Dupont Nason Paint Color Chart Pdf _ (Download Only) Created Date: 5/31/2023 7:53:26 AMAxalta Nason Ful-Base Reducer 441-21 Medium Quart. Item#: NAS 441-21 -4. Reducer for Nason topcoats and urethane primers. 65-85 Degrees.Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)Nason 496-00 SelectClear 2K Urethane Spot Clear. Vendor: Mahopac Auto Paint. $146.99. $123.00. Nason 483-70 Selectclear 2K Activator-Mid-Temp (2.5L) Vendor: Mahopac Auto Paint. $171.99. $140.00. Nason 475-00 SelectClear 2K Urethane High Image Clear.

Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.. Opercent27reilly auto parts distribution center

nason ful thane 2k urethane single stage mixing ratio

If you use more reducer, or over reduce it, you can use the 2k primer as a sealer as well. MTK isn't a primer. It's a SS topcoat urethane that can be cleared or mixed with clear on the final coat.Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. Axalta Nason Fulthane 2K Urethane Gallon Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix ...If you use more reducer, or over reduce it, you can use the 2k primer as a sealer as well. MTK isn't a primer. It's a SS topcoat urethane that can be cleared or mixed with clear on the final coat.MSDS Technical Data Sheet Description A urethane single-stage topcoat that is easy-to-apply and provides outstanding durability for a variety of applications. Features Solventborne Easy to apply Outstanding durability Product Details Available Sizes Mixing Instructions Application Instructions ApplicationA catalyzed, dried, 1/4"-thick sample of the Nason Ful-Thane® 2K urethane SS remains incredibly flexible.Parts by Volume. IF Quality. 8. 483-00™. 1/2. 441-2X. 4. Viscosity. 20-21 seconds in a Zahn #2 cup.MIX RATIO Combine the components by volume (4:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane® 2K Urethane Topcoat (IS Quality) 4 Ful-Base® 483-56™ Low VOC Activator 1 Ful-Base® 441-60™ / 441-66™ / 441-68™ Reducer 2 ADDITIVES Fisheye Eliminator Add ½ to 2 oz Nason® 495-02™ Low VOC Fisheye Eliminator per ready ...Axalta Nason 2K Integrated Clear 401-20. Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors.pre-formulated flat/mat clears are SOOOOOOOOO much easier on bigger jobs and all overs. all you do is mix and go. you can adjust the flatness by how many coats and reducer, again so much easier than a flattening ratio with an additive. i've done a few with sikkens mat clear with no problems, now give me a 2 component system where i have to mix some single stage and flattener in it and i cant ...Oct 23, 2013 · 8-1-2 ratio is for Nason Ful-Thane single stage . Check the label on the can of color for the correct ratio and hardener numbers . If the lower door is your only problem why not just respray the door to the side mldg just above the handle . To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Do not use under any urethane paints other than Nason® Ful-Thane® 2K Urethane. Use same reducer for Bond-Seal™ as recommended for the Nason® single-stage topcoat to be applied. DRY TIMES To topcoat (for Nasco™ and Ful-Base® Topcoats): 10 minutes, but within 8 hours PHYSICAL PROPERTIES All Values Ready To Spray Max.Axalta Nason Fulthane 2K Urethane Quart Mix. Item#: NAS IB -4. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles.Additive: FEE: 2-4 oz 495-01™ per RTS gal. Accelerator: 2-4 oz 483-18™ per RTS gal. Viscosity: 20-21 seconds in a Zahn #2 cup: Pot Life: 4 hours at 70°FParts by Volume. 491-10™. 2. 483-01™ / 483-02™. 1. Viscosity. 20-22 seconds in a Zahn #2 cup. Pot Life. 12 hours at 70°F.MIXING COMPONENTS Mix 2 parts NasonXL Basecoat Color to 1 part NasonXL Reducer. Thin to spray viscosity of 16 secs with #4 Ford @ 77°F/25°C for spraying. Option for longer re-coating: Add 5% hardener to premixed basecoat Component Volume NasonXL Basecoat Color 2 NasonXL Reducers 1 (447-65 Fast, 447-75 Medium, 447-85 Slow) Package SizesAxalta Nason Fulthane 2K Urethane Quart Mix. Item#: NAS IB -4. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles.Parts by Volume. 491-10™. 2. 483-01™ / 483-02™. 1. Viscosity. 20-22 seconds in a Zahn #2 cup. Pot Life. 12 hours at 70°F.Axalta Nason Fulthane 2K Urethane Quart Mix. Item#: NAS IB -4. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles..

Popular Topics